XRC Starter Bush Kit 2016 and Older & Freeride 250R (4 bushings)

$39.99

XRC (Xtreme Race Components) KTM/Husky/Husaberg 250-300 2-stroke 4 bush kit for up to year model 2016 and KTM Freeride 250R. Kit includes 4 high quality bronze standard length bushings and an install tool.

Note- The bronze bushings included in the 2017 2-bush and 2016 4-bush kits are the same.

13 in stock (can be backordered)

Category:
 

Description

There are a lot of KTM/Husky starter fixes but most of them are either expensive, really time consuming or both. None of them actually address the root of the problem, which are the soft, sticky, low quality bushes. The XRC quality bronze bush kit fixes this issue. The bushes are manufactured from a much harder material which allows the starter gears to spin much more freely. This means the starter motor power goes directly to the starting the engine not getting wasted having to over come the original bush friction. Translating to a much faster starter rotation speed regardless of whether the bike is in gear or the battery not being at full charge. Because of their high quality materials these bushes last much, much longer than the standard ones, you’ll forget what your kick starter even looks like!

Note 1: When installing XRC bronze bushings they should be a light press fit in the engine case and cover. However, it’s common that the stock bushings spin in the bushing bore and create wear, resulting in a loose fit. It is essential that new bushings are held securely in place and some retention compound (Eg. Loctite 638, or 648) can be used. If the bushing bore is badly damaged it should be repaired, or replaced before installing new bushings.

Note 2: Various XRC bronze bushing kits are available for KTM/Husqvarna 2-stroke models. See table below for compatibility. If not sure what you need please use the contact form and ask.

Additional information

Weight 70 g